TNM7000 CAR ECU Programmer Remap ECU Tuning TNM7000E Support OBD/JTAG/ISP programming

TNM 7000E 5-in-1 CAR Programmer

Universal programmer: Supporting 25000 Devices (Flash NOR/NAND/SPI , EEPROM , MCUs , CPLD and EMMC).

ECU-KIT Software : ECU , Immobilizer, Dashboard programming through JTAG /ISP/BDM /GPT. OBD Cable Downloading.
ECU Remap software: ECU tuning + checksum calculation.
CAN Analyzer software: for diagnosing CAR CAN-BUS problems and reverse engineering.
80 Msps /20 MHz -1 channel Digital Oscilloscope: Optional Accessory board + 8 Channel 200 Msps Logic Analyzer.

with Free ECU-KIT car programming Software:

Supporting OBD/JTAG/ISP programming of Bosch, Delphi, Continental, Siemens, Denso, Mitsubishi, Valeo , Sagem , Magneti Marelli and many other units with wiring diagram and checksum calculation. Support of most MCUs Used in Car ECUs , Immobilizers , BCM , UCH , ABS , AirBag including:
Full Motorola(Freescale) 9S12 series with unsecure capiblity / Infineon Tricore TC17xx series with password reading for many ECUs / Hitachi SH705x read and write / Full Microchip PIC & DSPIC support / Full Atmel microcontrollers support / NXP PCF79xx remote chips / Renesas R5F10Dxx (Secured EEPROM read + Write) / NEC upd70F3xxx series support / NEC UPD78F0828-937-949 Dashboard / NEC UPD78K0 Dashboard External/Internal EEPROM Read write through MBUS / Infineon XC233x , XC236x MCUs used in AirBags / Fujitsu MB91F06x & MB91F5xx MCUs used in Dashboards.

ISP Protocols: Tricore Boot / Bosch GPT (without ECU opening) / ST10F Boot Mode (Kline & ISP) / Motorola BDM with 9S12 Glitch security removal capability / Denso 76F00xx NBD / MPC5XX BDM / JTAG MPC5XXX / JTAG SPC56xx / Mitsubishi Boot / NEC MBUS.

OBD Downloader and Reading with Checksum calculation:
Remap and ECU Tuning: Remap Tables and 2D & 3D Views + Checksum calculation.
Free software upgrade: Windows XP/VISTA/7/8/10 (32,64 bits) Support.

Programmer Software:

25000 Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD).48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.
USB 2.0 High Speed ,Read EMMC /Nand Flashes with 12Mbyte/Sec , Reading Serial Flash memory with 8 Mbit/Sec.
Auto detection of all flash Memories/Microcontrollers with Device ID.
Multiple Programming is possible by attaching 2 or more Programmers to one PC.
Low cost adaptors , works with many different adaptors from other programmers.

Package Includes:

1PC TNM 7000 ECUKIT Programmer
1PC obd2 cable
1PC Complementary board (Ktag-jtag-Tricor)