Cleaning borescope inspection camera Car evoporator clean tool endoscop

This Multifunctional cleaning borescope is for cleaning endoscopes of automotive air conditioner evaporators. It is suitable for narrow spaces and dead corners where the field of vision is blurred, it is impossible to observe, and cleaning is difficult.
Used together with detergents to achieve non-destructive testing and cleaning. The method of use is: Connect the air pipe to the lower air inlet at the rear of the product, and fill the storage bottle with detergent and disinfectant.

Through the non-destructive inspection video function of the endoscope, the liquid spray port extending with the camera is viewed for real-time observation. After the air switch wrench is pulled, the air pressure drives the liquid in the liquid reservoir to be ejected.For small parts, the cleaning status can be checked in real time.

Car evoporator clean tool Specification:

Screen
Power supply: polymer lithium battery, 3.7V
Battery capacity: 1650mAh
Battery using time: about 5 hours
Charging indicator light: red light when charging, green light when charging full
Working indicator light: green light when working, light flashes ten times when low power, and turn off without light
ON/OFF: press long to turn off, press long to turn off
Charging time: about 3 hours
Charging mode: mini USB DC4.35V-6V
Charge current(OFF): 700ma
Standby current: less than 20ma
Max.working current: 190ma
Reset key : YES
Key button(3): ON/OFF, image rotation, screen brightness
Image rotation: YES,0,90,180 and 270 degree rotation
Screen size: 4.3 inch
Pixels: 320*240
Focus distance: fixed focus
Screen brightness control: YES

Handle

Power supply: polymer lithium battery
Battery capacity: 1000ma
Using time: about 4.5 hours
Water control mode/times: direct connection, unlimited times
Gas control mode/times: electromagnetic valve, 300,000 times
Charging indicator light: red light when charging, green light when charging full
Working indicator light: green light when working, light flashes ten times when low power, and turn off without light
Charging time: about 2 hours
Max.transient current: less than 500ma
Max.stable current: 130ma